Industrial Sewing Machines are intended for factory use. Some machines are designed to make shirts cuffs and some are are designed to put the waistband in jeans. These machines are built specifically to do long term and professional tasks.
Choose your best Matching Industrial Sewing Machine from below listed products.
These are more generic. A motor of any industrial machine can work on any brand. Overlocker and straight stitch machines are same. Sewing feet and bobbin between brands also interchangeable. The motors in the industrial machines have separate components and mounted to the underside of the table. They have usually two types of motors
The motors in the industrial machines have separate components and mounted to the underside of the table. They have usually two types of motors
- Servo motor – These use less electricity and silent when not in use.
- Clutch Motor – It always spins even when not in use.
The industrial sewing machines are mainly 4 types according to the design of their arm and needle post. They are
- Flat Bed
- Post Bed
- Cylinder Bed
- Off the arm
If you want to start an industry for garments, shoes then you can for the industrial sewing machine. It is not for small business.
The construction and design of the Flat Bed sewing machine is similar to the traditional sewing machine. Because in this the arm and the needle extend to the flat base of the machine like the traditional sewing machine. It is mainly used for sewing flat pieces of fabric together.
This is the opposite of flatbed. They have a narrow and horizontal column. Because of, this the fabric pass around and under the column. The diameter of the cylinder varies from 5 cm to 16 cm. It is used for sewing cylindrical pieces like cuffs. It is also used to sew saddles and shoes.
These machines have vertical column arise above the flat base of a machine. The height of the vertical column is 10 to 45 cm. These have bobbins, feed dogs/loopers in the vertical column. Post bed machines are used for attaching emblems, boot making and glove making.
These are not much common. In this type of a machine, the worker needs to feed material along the axis of a horizontal column. It is useful in seaming sleeves and shoulder.